Map download for Sensus Navigation

MapCareTM is a map update service for Volvo cars equipped with Sensus Navigation. Maps are updated in two steps. First, the map is downloaded to a USB memory and then the map is loaded from the USB memory to the car. Instructions for these steps are described in this article.

Preparations

The map must be downloaded to an empty USB memory (32GB) with FAT32 formatting. If you do not have a USB memory to hand, you can download the map to another location. You then need to copy all the files to an empty USB memory later on.

Map download program

Map downloads are carried out using a program that is installed on your computer. This program helps you to download the large map file and allows you to interrupt the download and resume it later.

Perform the map update

By selecting your car and model year under the "cars" menu option, you will access information for that car. Under the tab for software and downloads, you will find current updates related to your particular navigation system. Click on the update you want to carry out and then follow the instructions below.

Please note the following:

  • A map update may take 1-2 hours to execute and needs to run when the infotainment system is operational. Use a battery charger or keep the car's engine running while the update is in progress. The update time depends on the size of the map.
  • The map update is paused if the Infotainment system is switched off or if the USB memory is removed before the update is complete. The update is resumed automatically when the system is switched back on or when the USB memory is reinserted.
  • If you want to update your navigation system with a different map to the one already in the system, you first need to contact your nearest Volvo dealer to check that this is possible.

Instructions

Click on "Download for Mac" or "Download for Windows" for the selected area.

Select "Run" to install the map download program.

Click on "New download" to download the map to a USB memory or to the computer's hard disk drive.

You can verify that the download/copying to the USB memory has worked correctly before you install the map in the car by pressing on "Check download" in the map download program.

Take the USB memory with the downloaded map on to your car and switch on the infotainment system.

Insert the USB memory in the USB port.

P3/P4 - Support site - MapUpdate - USB

The position of this port may vary depending on the car model.

The map update is initiated automatically. The infotainment system notifies you of the time for the update and asks you to confirm that you want to continue.

Press OK/MENU. The map update begins and a "progress bar" is displayed.

P3/P4 - Support site - MapUpdate - started

Map update in progress.

Remove the USB memory when the update is complete.

If there are any problems with the map update, contact your customer support or Volvo dealer.

It is not appropriate to use a mobile connection when downloading, e.g. using mobile devices/phones or if the subscription has a limit on the number of GB that can be downloaded per month.

Was this helpful?

Thanks for your feedback.
Glad we could help.
Feedback
Send
Yes No
This article is applicable to

Related information

MapCareTM
Share